hpiLO-> oemhp_ping 192.168.0.91
status=0
status_tag=COMMAND COMPLETED
The ping was successful.
hpiLO-> show /map1/snmp1
status=0
status_tag=COMMAND COMPLETED
/map1/snmp1
Targets
Properties
accessinfo1=0
accessinfo2=0
accessinfo3=0
oemhp_iloalert=yes
oemhp_agentalert=yes
oemhp_snmppassthru=yes
oemhp_imagenturl=BA-UAG-001
oemhp_imdatalevel=enabled
Verbs
cd version exit show set
hpiLO-> help
status=0
status_tag=COMMAND COMPLETED
DMTF SMASH CLP Commands:
help : Used to get context sensitive help.
show : Used to display values of a property or contents of a collection target.
create : Used to create new instances in the name space of the MAP.
Example: create /map1/accounts1 username= password= name=
group=
delete : Used to destroy instances in the name space of the MAP.
Example: delete /map1/accounts1/
load : Used to move a binary image from an URL to the MAP.
Example : load -source http://192.168.1.1/images/fw/iLO3_130.bin
reset : Causes a target to cycle from enabled to disabled and back to enabled.
set : Used to set a property or set of properties to a specific value.
start : Used to cause a target to change state to a higher run level.
stop : Used to cause a target to change state to a lower run level.
cd : Used to set the current default target.
Example: cd targetname
exit : Used to terminate the CLP session.
version : Used to query the version of the CLP implementation or other CLP elements.
oemhp_ping : Used to determine if an IP address is reachable from this iLO 3.
Example : oemhp_ping 192.168.1.1 , where 192.168.1.1 is the IP address that you wish to ping
oemhp_loadSSHKey : Used to authorize a SSH Key File from an URL
Example : oemhp_loadSSHKey -source http://UserName:password@192.168.1.1/images/SSHkey1.pub
HP CLI Commands:
POWER : Control server power.
UID : Control Unit-ID light.
NMI : Generate an NMI.
VM : Virtual media commands.
LANGUAGE : Command to set or get default language
VSP : Invoke virtual serial port.
TEXTCONS : Invoke Remote Text Console.
hpiLO-> cd /map1/snmp1
status=0
status_tag=COMMAND COMPLETED
/map1/snmp1
hpiLO-> show
status=0
status_tag=COMMAND COMPLETED
/map1/snmp1
Targets
Properties
accessinfo1=192.168.0.91
accessinfo2=0
accessinfo3=0
oemhp_iloalert=yes
oemhp_agentalert=yes
oemhp_snmppassthru=yes
oemhp_imagenturl=BA-UAG-001
oemhp_imdatalevel=enabled
Verbs
cd version exit show set
hpiLO-> set oemhp_imdatalevel=Enabled
status=0
status_tag=COMMAND COMPLETED
SNMP settings modified.
Source:https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c02774508
IPMI configuration
https://wiki.chipp.ch/twiki/bin/view/CmsTier3/HPProLiantDL380G7ILO3
